CelCulture® CO2 Incubators

CelCulture® CO2 Incubators

VivoCell™ Precise Temperature, CO₂ Control, High Humidity 

  • 최고의 균일성과 제어
  • Overshoot 없는 빠른 CO2, 온도와 습도 회복
  • 3구역으로 나뉘어진 8개의 히터로 빠른 회복을 위한 Direct heat design
  • Air jacket - 주변 온도 변화로부터 격리 제공
  • VentiFlow™ 강제 대류는 문이 닫힌 후 빠르게 챔버 공기를 ISO Class 5 Cleanliness로 회복하여 오염 방지
  • 여과된 공기가 water pan 순환하며 가습 과정을 가속화
  • 세포 배양을 방해하지 않으며 culture plate 주변으로 순환하는 기류
  • 도어가 열리면 자동으로 블로워가 멈추며 챔버와 외부 공기의 혼합을 최소화

Contamination Control System 

  • SteriSafe™ ULPA 필터 시스템은 ISO class 5 챔버 환경 유지 
  • SwiftCon™ 90˚C validated moist heat decontamination cycle이 예상치 못한 오염까지 제거. 사이클 마지막 단계에서 챔버는 사용준비 사용준비 상태로 건조됨                        *Note: For CCL-50L units, further wipe down of the chamber is needed since it has no decon pump and condensation will normally occur after the decontamination cycle.
  • 모든 유입 가스는 챔버에 유입되기 전 in-line filter를 통해 불순물과 오염 제거
  • ISOCIDE™ 항바이러스 코팅처리된 electro-galvanized steel 본체
  • Stainless steel type 304 챔버 내부

User-Friendly Software Interface

  • Comprehensive user-configurable alarms 
  • 사용자에게 CO₂ tank와 ULPA filter 교체시기를 알려주는 CelAlert™ alarm system 
  • 지능형 데이터(Intelligent data)와 사고기록기(Event logger) 
  • 데이터 장기간 저장이 가능한 2MB built-in flash memory 
  • Diagnostic interface 와 online quick help가 자주 발생하는 오류에 대한 빠른 해결 제공 -
  • RS485 data output

Easy-to-Clean

  • 챔버는 모두 둥근 모서리의 세척이 용이한 스테인리스 스틸로 구성
  • 도구 없이 쉽게 분리 가능 - Ductwork, plenum, shelf
  • 도구 없이 쉽게 분리 가능한 글래스 도어
  • 도구 없이 쉽게 분리 가능한 내부 가스켓 

Easy-to-Service

  • 마이크로프로세서의 진단 기능으로 historical read-out 가능
  • 상단/정면에서 서비스 가능
  • Calibration 필요성을 최소화하도록 디자인된 전자부품 및 센서

IR Sensor Model With Stainless Steel Chamber

Models
Descriptions
 
CCL-170B-8
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
CCL-170B-8-NF
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, Moist Heat Decon, 230VAC 50/60HZ (No ULPA Filter)
 
CCL-240B-8
CelCulture® Incubator, 240L, IR Sensor, CO2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
CCL-240B-8-NF
CelCulture® Incubator, 240L, IR Sensor, CO2 Control, Moist Heat Decon, 230VAC 50/60HZ (No ULPA Filter)
 

Surppressed O2 Model With Stainless Steel Chamber

Models
Descriptions
 
CCL-170T-8
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, O2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
CCL-170T-8-NF
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, O2 Control, Moist Heat Decon, 230VAC 50/60HZ (No ULPA Filter)
 
CCL-240T-8
CelCulture® Incubator, 240L, IR Sensor, CO2 Control, O2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
CCL-240T-8-NF
CelCulture® Incubator, 240L, IR Sensor, CO2 Control, O2 Control, Moist Heat Decon, 230VAC 50/60HZ (No ULPA Filter)
 

 

IR Sensor Model With 100% Copper Chamber

Models
Descriptions
 
CCL-170B-8-Cu
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
 
CCL-240B-8-Cu
CelCulture® Incubator, 240L, IR Sensor, CO2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
 

Surppressed O2 Model With 100% Copper Chamber

Models
Descriptions
 
CCL-170T-8-Cu
CelCulture® Incubator, 170L, IR Sensor, CO2 Control, O2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
 
CCL-240T-8-Cu
CelCulture® Incubator, 240L, IR Sensor, CO2 Control, O2 Control, ULPA, Moist Heat Decon, 230VAC 50/60HZ
 

Options

  • COA-1001 : Humidity Display, Factory Installed
  • COA-1001-F : Humidity Display, Field-Installed Kit
  • COA-1002 : CO₂ Backup (Tank Switcher), Factory Installed
  • COA-1002-F : CO₂ Backup (Tank Switcher), Field Installed
  • COA-1004 : Reversed Door Swing, Factory Installed
  • COA-1005 : Analog Outputs, Factory Installed
  • COA-1005-F : Analog Outputs, Field Installed
  • COA-1006 : Sealed Inner Door Kit  for 170 L (4 Glass Doors With Latches), Factory Installed
  • COA-1006-F : Sealed Inner Door Kit (4 Glass Doors With Latches), Field Installed
  • COA-1007 : N₂ Backup (Tank Switcher), Factory Installed
  • COA-1007-F : N₂ Backup (Tank Switcher), Factory Installed

Accessories

  • COA-2018-F : Roller Base (50 L)
  • COA-2001-F : Roller Base (170 L)
  • COA-2019-F : Roller Base (240 L)
  • COA-2020-F : Floor Stand 200 mm (8.0") With Adjustable Feet (50 L)
  • COA-2002-F : Floor Stand 200 mm (8.0") With Adjustable Feet (170 L)
  • COA-2021-F : Floor Stand 200 mm (8.0") With Adjustable Feet (240 L)
  • COA-2022-F : Floor Stand 700 mm (27.6") With Casters (50 L)
  • COA-2003-F : Floor Stand 700 mm (27.6") With Casters (170 L)
  • COA-2023-F : Floor Stand 700 mm (27.6") With Casters (240 L)
  • COA-2004 : CCL-170 2-Units Floor Stand
  • COA-2005-F : 2-Stage Gas Regulator for CO₂/N₂
    • Choose One of The Connectors Below:
    • 1080588 - CGA 320 Connector (US Standard)
    • 1080589 - BP-BS34-#8-NT4 Connector (British Standard)
    • 1080590 - G5/8-RH Connector (China Standard)
  • COA-2024-F : Extra Shelf (50 L, Stainless Steel)
  • COA-2007-F : Extra Shelf (170 L, Stainless Steel)
  • COA-2025-F : Extra Shelf (240 L, Stainless Steel)
  • COA-2008-F : Stacking Kit (One Set Included With Every Unit Purchased)
  • COA-2010-F : Electronic CO₂ Analyzer, For CO₂/O₂ Temp Measurement (With Temp. Probe)
  • COA-2016-F : Electronic CO₂ + O₂ Analyzer, For CO₂/O₂ Temp Measurement (With Temp. Probe)
  • COA-2017-F : Electronic CO₂ + O₂ + RH Analyzer, For CO₂/O₂/RH/Temp Measurement (With Temp. Probe)
  • COA-2011-F : IQ/OQ Documentation
  • COA-2012-F : 6" Chart Recorder, Temp, 115/230 VAC 50/60 Hz
  • COA-2013-F : 8" Chart Recorder, Temp/Temp, 115/230 VAC 50/60 Hz
  • COA-2014-F : 6" Chart Recorder, Temp/RH, 115/230 VAC 50/60 Hz
  • COA-2015-F : Inner Door Shelving Kit (4 Sets With Total 12 Mini Shelves For One Incubator)
  • COA-2026-F : Extra Shelf (50 L, Solid Copper)
  • COA-2027-F : Extra Shelf (170 L, Solid Copper)
  • COA-2028-F : Extra Shelf (240 L, Solid Copper)
  • 5250001 : Voyager® Software Kit